• Skip to primary navigation
  • Skip to main content
ShoeBox Audio

ShoeBox Audio

Music recording, Foley & audio post, Archival grade audio digitisation

  • Home
  • Our services
    • Audio post production
    • Audio digitisation
    • Music production
  • Portfolio
    • Music discography
    • Foley & film sound
  • About Us
  • Contact

News

Power Supply for 2008 MacPro

Lately one of the MacPro computers at the studio has been shutting down for no reason. One minute you are working away happily and then boom! The computer would be off, as if someone had pulled the power chord out.

After much checking stuff, jiggling of cables, googling, switching ram in and out etc etc etc I came to the conclusion that something was wrong with the power supply circuit in the computer. Not a totally systematic and precise diagnosis but everything was pointing to it being the smoking gun.

A quick look on eBay and power supplies for the machine cost between $200 and $900. Not exactly the sort of money I want to spend on an 8 year old computer. Especially when you can pick up a second hand Mac Mini for the same amount of money that is more powerful (no PCIe slots though).

–This is the part of the post where I put in the standard warning about how working with electronics can be dangerous and don’t do it if you don’t know what you are doing – read more here—

I began to wonder if, after 8 years of operation and associated temperature fluctuations, the power supply was suffering from dry solder joints. I pulled the unit out (a bit of googling provided this tutorial) thinking I would tidy up the solder joints with my trusty soldering iron. But the power supply was (naturally) a whole lot more complicated than power supplies in other gear I own and have done simple repairs on. I shouldn’t have been surprised really, this is Apple after all. What really scuppered my plan was all the tiny surface mount components. Not the sort of thing I want to go poking around with only a hand held soldering iron, I just don’t have the skills for that sort of thing. I had to think of a plan B.

A few years back I had a USB tv tuner that was going a bit weird / USB connection problem. A bit of googling showed it was a common problem with these devices. The soldering of the circuit board was not great, the manufacturing was a little too ‘efficient’, and after a while they were all getting dry joints. The solution for these little devices was to bake them in the oven. The theory being that you heat up the circuit board enough to melt the solder and then let it reset again. I gave it a go and it worked – and still works to this day.

So, I began to wonder if it would work on my power supply. The 2 items are quite different; one a small USB device with a couple of little chips and components, the other , 2 much larger circuit boards with not only small surface mount components but large transformers, big filter caps, inductors and god knows what else – and a lot of cables that I couldn’t easily remove. Well, the computer already didn’t work and if I wrecked the power supply it still wouldn’t work. No real loss. Also, there are plenty of people out on the internet who are baking CPU boards from all sorts of devices with varying degrees of success which I, perhaps foolishly, took as an encouraging sign.

So into the oven it went at 200C for 10 minutes and then left to cool down for about half an hour before I touched it. I reassembled the computer, pugged it into my RCD and switched it on fully expecting to see the magic smoke come out.

To my surprise it booted up properly and worked perfectly.

Excellent, one fixed computer.

Now, back to work.


UPDATE: About 2 weeks later the power supply started playing up again. Fortunately I had copied all the data off it to be on the safe side. I suppose the old machine is trying to tell me that it would like to retire gracefully. So it has now, sadly, become a box of spare parts for my remaining MacPro.


WARNING:

If you make a mistake with mains power it can kill you. Large power caps can hold charge long after the power has been removed (largely the reason why I avoid instrument amplifiers), and there are plenty of other ways to hurt yourself badly if you do not take care.
If you choose to undertake work similar to what I have outlined here, that is entirely your responsibility. If you do not know what you are doing or even feel a bit out of your comfort zone, PLEASE DON’T CONTINUE. Pack up, find a tech that does know what they are doing and give it to them.

I am not trained in electronics, fault diagnosis or repairs. I am simply an enthusiastic tinkerer who has built up some basic knowledge over the years. Most importantly, I know where my boundaries are and when I should stop work and hand a repair job over to a real technician.
When working, I always check the power is off and unplugged at least twice and use an RCD when I do need to power something up. This healthy paranoia has kept me accident free for more than 20 years.

Please, be sensible, stay safe and live to a ripe old age.

No Input Sound Samples

Here are some samples for people to listen to on Soundcloud from our No Input mixing session (as described here):

No Input, No Idea

Too many mixers to be healthy

Last week Andrew Mooney and I set up a bunch of gear to have a crack at some no input mixing. We’d each had a basic play with no input stuff on our own, but wanted to push things a little further with additional gear and effects and collaborating to have someone else to “jam” with. The gear we used including a couple Soundcraft mixers, a Yamaha 02R, a little Behringer mixer and a few boxes for effects.

No input mixing is a noise technique where you connect outputs to inputs on a mixer to intentionally create feedback. This feedback is the basis for playing around. In our case we included some effects so that we had plenty of scope for messing with sounds. Here is a video showing some basic no input mixing:

No input arguably falls into the category of gear abuse, but it can be a lot of fun. Part of the fun is that it is quite hard to control and know what you are going to get. At least for us newbies. The following video shows a guy who knows what he is doing who has tuned his feedback so that he can play more standard compositions:

‘Fratres’ pour console no-input (extrait) from Christian Carrière on Vimeo.

We recorded over an hour of our no input jamming, and will post some samples up soon.

Whoo Mama

It has been a while since my last post and a lot has happened. Here’s a few highlights.

2012 MAMA Awards for Best Studio, Engineer and Production. Duncan Lowe

First, and most notable, was that Infidel Studios and I won, what seems to be, a combined & inaugural MAMA award for Engineer/Producer/Studio of 2012.

Thank you to all the people at the MAMAs for organising the awards. Unfortunately I was unable to attend the awards night but it was a fantastic event by all accounts.

And especially, a big thank you to everyone who has been though the doors of Infidel Studios since it opened in its current location in 1999.

I spent large part of the end of last year were spent making an album for Na Maza. I can’t wait ’til it comes out. All I can say about it is that it sounds like two planets crashing into each other. The rest is sworn to secrecy … for now.

The brass knuckles came back and all I can say is

SOUSAPHONE!!

I have wanted to record one for years.

Sousaphone
Paco playing congas

And look who popped in to lay down some congas for some production music.

It was fantastic to have Paco back in the studio.

And also. Currently Tim is working on a recording with Little Mac and The Monster Men and I am working on, what seem to be, a much anticipated EP by Magic Rob Universe. More on these later …..

TSP & The Speaker-Mic Recording

Quite a long while ago Tim blew up one of the speakers in his home stereo. Instead of throwing out the remaining good speaker with the broken one he decided to put it to work. He ripped the 8″ driver out of the enclosure, soldered a cable and cannon plug to the terminals and mounted it in an old disused snare stand.

Photo by Lushpup images

It is lucky for us that he did. The day he brought it in to give it a try we were tracking electric guitars and looking for an older fashioned sound. The speaker mic was tried and turned out to be the exactly the sound we were looking for – no other mic was used on the guitar amp that day.

The speaker mic has since become our go-to bass amp mic as well as being used to fatten kick drums and even tried on vocals, with varying degrees of success.

Tim, being the kind of person that he is, simply couldn’t leave it there. His band – Teen Skank Parade – were going their seperate ways at the time and there was a bunch of songs that they didn’t have a recording of.

He came up with a plan and got Cam and I to help him with it.

There were rules:

  1. No microphones allowed, only speakers.
  2. Nothing digital was allowed to be used.
  3. The band had to play live, no overdubs.
  4. We had to record a live mix straight to 1/4″ 2 track tape.

Cam and I managed to negotiate a slight modification to the rules and were allowed to take a multitrack analogue recording along with the live stereo mix.

On the day Tim arrived with a box of broken and/or discarded speakers and headphones. Cam, Tim and I got to work with the soldering iron while the band setup. Tim had an apple eyeball computer speaker for the snare mic and a pair of headphones that he wore inside out – tied onto his head – for his drum overheads (pardon the terrible pun).

10 and 12 inch speakers were simply gaffered stright onto the face of guitar and bass amps and Sully sang into a 6″ speaker cone.

Cam and I took the “all analogue” rule to heart and supplemented our spring reverb with a couple of other homemade effects. The front recreation room was turned into a reverb chamber – signal was sent to the stereo system and a couple of speaker=mics were used to return the sound of the room back to the mixer. The Studer 1/4″ machine was threaded up, slowed down to 3.75 ips and used as a tape delay.

We had to eq in a decent amount of highs to compensate for the natural rolloff that the speakers had. The overall sound was thick, fat and dirty. Very dirty.

Which suited the band quite well as they are dirty boys with dirty minds and dirty mouths. You can hear a sample of the recording here but be warned, you may be able to hear some bad language through the noise.

Tim made this movie of the whole process, and he has a lot more information about the project on his website here.

  • « Go to Previous Page
  • Page 1
  • Page 2

Copyright © 2026 · Imposter Theme on Genesis Framework